Construction site sweepers and scrubbers

Keep construction sites, building slabs and civil works areas clean, safe and compliant. Sweeper.com.au supplies and services construction machines built for Australian building sites, from cement dust suppression on slabs to debris removal on civil works access roads and demolition areas.

Floor cleaning equipment for construction sites and civil works

Construction sites generate some of the most challenging cleaning conditions of any work environment. Cement dust, concrete residue, aggregate, asphalt debris, and fine silica particulates accumulate on building slabs, access roads and hardstand areas throughout every phase of a project; from early civil works through to fit-out and handover. Left unmanaged, that build-up creates serious WHS hazards for workers, risks non-compliance with dust management and EPA obligations under Australian workplace health and safety legislation, and leaves sites unsafe for follow-on trades.

ASC supplies industrial construction equipment purpose-built for these environments; delivering a complete construction cleaning solution from cement dust suppression on building slabs to heavy debris removal on civil works access roads, keeping construction sites clean, safe and compliant.

Why construction operators choose ASC machines

  • Cement-grade dust suppression as standard ASC sweepers use an enclosed collection system with integrated water-based dust suppression, capturing cement dust and fine silica particulates at source. This meets PM10 dust control standards and supports compliance with Safe Work Australia and EPA dust management requirements on construction sites.
  • Built for construction debris ASC construction machines are engineered to collect heavy construction debris including aggregate, concrete chips, asphalt fragments, brick rubble and fine cement dust. Machines are specified and configured to match the debris type and surface condition of each site phase.
  • Covers site-scale and floor-scale cleaning Whether sweeping large civil works access roads, clearing building slabs during construction, or scrubbing concrete floors in the fit-out phase, ASC offers a range of walk-behind and ride-on models to suit every zone and every project stage.
  • Service life of 12 to 20 years ASC machines are engineered for durability in heavy-duty industrial use. Simple daily maintenance keeps machines performing across every shift, with an average service life of 12 to 20 years in construction and civil works environments.
  • Multiple power options for any environment Battery, LPG, diesel and petrol-powered models are available. Battery-powered machines suit enclosed indoor construction areas and fit-out environments where emissions and noise must be controlled. Diesel and petrol models handle large outdoor civil works areas, access roads and external hardstand.
  • Flexible purchase and hire options Buy outright, hire for a project or construction phase, or explore finance options. Sweeper.com.au works with builders, civil contractors, project managers and facilities managers across Australia.

Contact us

Explore the right cleaning solution for your facility and book an onsite demonstration.









    Industrial & commercial floor cleaning machines

    ASC (Australian Sweeper Corporation Pty Ltd) is Australia’s leading industrial and commercial floor cleaning equipment company. With over 28 years of cleaning experience, ASC leads the way with our comprehensive range of professional floor sweepers and scrubbers suited to all industries in Australia and New Zealand. Our industrial and commercial sweeper and scrubber machines are sourced and tested for effective cleaning performance and lasting quality and backed by our industry-leading warranties.

    A commercial construction system for every zone on your site

    Different zones on a construction site have different cleaning requirements. ASC industrial construction equipment is matched to each area.

    Commercial offices and retail spaces

    Smooth tile and vinyl floors in commercial offices, retail precincts and shopping centres require a scrubber that washes, scrubs and dries in a single pass without leaving streaks or wet surfaces. Battery-powered ASC scrubbers operate quietly without emissions, suited to cleaning during or adjacent to occupied business hours.

    Car parks and outdoor paved areas

    Car parks, pathways, footpaths and outdoor paved areas accumulate tyre dust, grit and general debris from vehicle and foot traffic. ASC walk behind and ride on sweepers maintain these surfaces efficiently, collecting debris and leaving surfaces clean without requiring manual sweeping of large open areas.

    Schools, hospitals and public facilities

    Schools, hospitals, aged care facilities and public buildings require consistent floor maintenance across high-traffic public-facing spaces with strict hygiene and safety standards. Battery-powered ASC scrubbers clean smooth floor surfaces thoroughly without noise or emissions that would disrupt the activities and occupants of these environments.

    Hospitality and entertainment venues

    Hotels, restaurants, function centres and entertainment venues maintain presentation standards across large floor areas with multiple surface types. ASC walk behind scrubbers clean dining areas, lobbies, corridors and back-of-house zones during off-peak periods, maintaining the standard of cleanliness that venue operators and their guests expect.

    Frequently asked questions

    What is the best sweeper & scrubber for cleaning a construction site?

    The right machine depends on the phase of construction and the type of debris involved. For building slabs under active construction, a walk-behind sweeper collects cement dust, aggregate and debris efficiently without generating secondary dust. For large civil works access roads and external areas, a ride-on sweeper with dust suppression manages high debris volumes across long distances. ASC assess your site and recommend the right equipment for each zone and phase.

    How do ASC sweepers manage cement dust on construction sites?

    ASC sweepers use an enclosed collection system with integrated water-based dust suppression to capture cement dust and fine silica particulates at source during the sweeping process. This prevents dust from becoming airborne, supporting compliance with PM10 dust control standards and EPA dust management requirements under Australian WHS legislation and state construction regulations.

    Can I use a battery-powered sweeper on an indoor construction site or in a fit-out environment?

    Yes. Battery-powered sweepers and scrubbers produce no exhaust emissions and are specifically suited to enclosed environments including buildings under fit-out, internal construction floors and enclosed car park structures. They operate without fumes, making them the appropriate choice for indoor construction phases where emissions and air quality must be managed.

    Can I hire a construction site sweeper or scrubber rather than buy?

    Yes. ASC offers hire options for specific project phases, short-term construction contracts, or for builders wanting to trial equipment before committing to a purchase.

    Does ASC service construction cleaning equipment across Australia?

    Yes. Sweeper.com.au is an authorised service provider for the equipment we supply. Our technicians are based across Australia and provide scheduled maintenance, breakdown response and parts supply to construction sites including regional and remote project locations.

    What WHS and EPA obligations apply to dust management on construction sites?

    Under Australian WHS legislation and state construction regulations, builders and site managers are required to manage cement dust and fine silica as hazardous substances and maintain work areas free from slip, trip and fall hazards. Silica dust is classified as a carcinogen under current occupational health and safety laws, making dust suppression a legal requirement on construction sites. Regular mechanical sweeping with dust-suppression-equipped machines supports compliance with Safe Work Australia guidelines and site-specific dust management plans.